Tuesday, January 20, 2009

How to Sew an Accurate Seam - A Tutorial

The following is a distillation of what I have gleaned from the various quilt books I have purchased and been given since I began learning how to quilt. I hope this proves to be as helpful for you as it has been for me.

Sewing an accurate quarter-inch seam is so important to proper quiltmaking that if you can't manage to do it, you might as well just pack up that sewing machine and take up a more appropriate hobby like, oh, I don't know, making sloppy crap. Because your entire worth as a quilter depends on this skill. No one wants to see a quilt where corners do not meet precisely on point, where seams are not in perfect alignment. Try to give a quilt like that to your mom and she's liable to wad it up, stomp on it, run over it with her car a few times, and deface it with spray-painted obscenities before throwing it back in your face.

So let's get started!

1) Take a look at your sewing machine and note the marks on the needle plate. One of these is marked "1/4". Ignore it. Chances are, you have one of those plastic, made-in-China, bought-on-sale-at-Target models, and everybody knows those are only good for being a doorstop, and they don't even do that well. That 1/4-inch mark was placed there by a godless commie who would like nothing better than to see you fail. Trust us, it ain't accurate. Come back after you've mortgaged your house and bought a real machine, preferably one with an unpronounceable name.

2) Okay, now take a look at the needle plate on your new machine and find the 1/4-inch mark. Ignore that one too. Oh, hush. At least you have a decent machine now.

3) Take a ruler, preferably one you use for cutting fabric and place it on your machine under the needle. Lower the needle carefully and adjust the ruler so that the needle just touches the 1/4-inch mark. Using the edge of the ruler as a guide, lay a piece of masking tape on the bed of the sewing machine, marking a line 1/4-inch distant from your needle. You can now use this line as a guide when you sew.

4) Oops! Forgot about that pesky bobbin thing. If you don't want to re-calibrate every time you change the bobbin (and we can't understand why you wouldn't, but whatever), you'll need to buy a quarter-inch presser foot. We'll wait while you compare the cost difference of replacement feet for your brand new shiny Nordic machine and the one we made you throw out in shame.

5) Once you figure out how to put the new foot on, you'll have to make sure that your machine, if it has multiple stitch settings, is set on the correct stitch for this foot. Otherwise as soon as you start to stitch, the needle will hit the foot and there will be terrible noises and lights flashing and things beeping, and you'll probably ruin your needle, if not the whole machine. We do not speak from experience. We have heard of someone this happened to, a friend of a friend. Loser.

6) If you are certain that you will not bring about the apocalypse when you begin sewing, you will need to test the accuracy of your new foot. Take a 2.5-inch wide strip of fabric and cut it into 2 sections that are 1.5 inches long each and one that is 2.5 inches long. Of course, this depends on you being able to cut accurately. You can do that, can't you?

7) Oh, for fuck's sake.

8) Look. We appreciate the fact that you want to take up this most noble and elegant art. But you're clearly not cut out for it, so to speak. Just hand over that nice, new machine and we'll never let on to anyone how much you suck.

9) Fine. You leave us no choice. We're calling your mom.

11 comments:

Vicki W said...

ROFLOL!

~Michelle~ said...

Hehehehehe.... Once again, you hit the nail on the head. Except calling mother - my mom would just laugh at me, and remind me that my aunt used to do her home ec projects so she wouldn't fail!

Linda said...

You are definitely a writer!!!
Lurking Linda

Cathi said...

Hysterical!! Love it!

2ndAvenueStudio-Rachel said...

you are so funny...
hysterical!

Ginny said...

I think I just wet myself laughing!
Thanks.

Sarcastic Quilter said...

Yes, call my mother, go ahead, I dare you. She'll remind you that if you were REALLY cut out for this, you should shut the hell up about marking a machine and sew it all by hand, using a ruler and pencil to mark your seam line if you are so incapable you can't "eyeball" it correctly. Which will remind her that you couldn't eyeball it on your machine in the first place and at which point, she'll offer to just do it for you with the heaviest of sighs (which you know has 600 different disappointing thougths behind it.) On second thought, don't call my mom... wait, unless you want your project done for you!

Anonymous said...

You crack me up!!!!!!

Karen in IN

Linda said...

When I first started quilting I measured and taped with black electrical tape on my sewing machine. I have found it is a WONDERFUL tool - I stick the pins in it as I sew my uneven lines! :D
Thank you for the laugh!
Linda

floribunda said...

thanks -- keep up the good work!

Ginny said...

I have tagged you for a picture meme. Please come on over and check it out! I really do love your blog, it is where I go when I need a pick me up.
Ginny